CU PE/PVC CONTROL CABLE
Control Cable 600 Volt Copper Conductors, Polyethylene and Polyvinyl Chloride (PE/PVC) Insulation Polyvinyl Chloride (PVC) Jacket, Control Cable Conductor Identification Method 1 Table 1. Silicone Free
Application
Southwire’s 600 Volt control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. Only UL rated constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10.
Specifications
Select a set of products below for more information:
| Conductor | ||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | |
| More Options |
4
4
|
14 AWG
14 AWG
|
7
7
|
20
0.51
|
424
10.77
|
110
163
|
| More Options |
7
7
|
14 AWG
14 AWG
|
7
7
|
20
0.51
|
494
12.56
|
167
248
|
| More Options |
12
12
|
14 AWG
14 AWG
|
7
7
|
20
0.51
|
692
17.58
|
298
443
|
| More Options |
4
4
|
12 AWG
12 AWG
|
7
7
|
20
0.51
|
464
11.79
|
149
222
|
| More Options |
6
6
|
12 AWG
12 AWG
|
7
7
|
20
0.51
|
589
14.97
|
227
338
|
| More Options |
7
7
|
12 AWG
12 AWG
|
7
7
|
20
0.51
|
589
14.97
|
254
378
|
| More Options |
12
12
|
12 AWG
12 AWG
|
19
19
|
20
0.51
|
771
19.58
|
409
608
|
| More Options |
2
2
|
10 AWG
10 AWG
|
7
7
|
20
0.51
|
452
11.49
|
120
178
|
| More Options |
3
3
|
10 AWG
10 AWG
|
7
7
|
20
0.51
|
480
12.21
|
170
253
|
| More Options |
8
8
|
10 AWG
10 AWG
|
7
7
|
20
0.51
|
716
18.19
|
399
594
|
| More Options |
9
9
|
10 AWG
10 AWG
|
7
7
|
20
0.51
|
769
19.54
|
455
677
|
Standards & References
- ASTM B3 Standard Specification for Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 2
- ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables
- ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
- IEEE 1202 FT4 Vertical Tray Flame Test (70,000 Btu/hr) and ICEA T-29-520 - (210,000 Btu/hr)
- VW-1 (Vertical-Wire) Flame Test
Construction
- Conductor:7 strands class B compressed bare copper per ASTM B3 and ASTM B8
- Insulation:Polyethylene (PE) 20 Mils thick and Polyvinyl Chloride (PVC) 10 Mils thick for all cable sizes
- Filler:Polypropylene filler on cables with 5 or less conductors
- Binder:Polyester flat thread binder tape applied for cables with more than 5 conductors
- Rip Chord:Rip chord for ease of jacket removal
- Overall Jacket:Polyvinyl Chloride (PVC) Jacket
- Color codes available upon request
Resources
There are no downloadable resources for this product.
Related Products
CCPR400S, CABLE CUTTER RATCHETING 600MCM
Model #: CCPR400S
Model #: CCPR400S
100-Feet Contractor Grade 12/3 Lighted End American Made Cord - Wounded Warrior Project®
Model #: 2549SWUSA1
Model #: 2549SWUSA1
Specifications PDF
PROBAGBP, TOOL BACKPACK
Model #: PROBAGBP
Model #: PROBAGBP