SPEC25050 CSA TECK 90 1000V PVC CONTROL CABLE
1000V Multi Conductor, 14-10 AWG Copper, FT4 - Flame Retardancy Rating, XLPE Insulation, Aluminum Interlocked Armour, Sunlight Resistant, -40°C - 90°C, Rated HL, AG14
Application
For exposed or concealed wiring in wet or dry locations. For use in ventilated, non-ventilated and ladder type cable troughs and ventilated flexible cableway in wet, dry, or hazardous locations. Sunlight Resistant. Typical applications are for control. lighting and power circuits in: pulp and paper mills, steel mills, food processing plants, commercial centers, mines, generating stations, refineries, industrial plants and chemical plants. <br> <ul> <li>-40°C - CSA Cold Bend and Impact Temperature</li> <li> -40°C - Min. Installation Temperature</li> <li> 90°C - Max. Continuous Operating Temperature</li> </ul>
Specifications
Select a set of products below for more information:
| Cond. Size (AWG/Kcmil) | Cond. Strands | Diameter Over Conductor (in) (cm) | Diameter Over Insulation (in) (cm) | Insulation Thickness (mils) (mm) | Diameter Over Shield (in) (cm) | Ground (No. x AWG) | Inner Jacket Thickness (mils) (mm) | Diameter Over Armor (in) (cm) | Drain Wire | Jacket Thickness (mils) (mm) | Approx. OD (in) (cm) | Approx. Weight (lbs/1000') (kgs/km) | Max Pull Tension (lbs) (kg) | Min. Bend Radius (in) (cm) | Conduit Size (in) (cm) | |
| 568448 |
14
14
|
7
7
|
0.070
0.18
|
|
45
1.14
|
|
1x14
1x14
|
65
1.65
|
0.690
1.75
|
|
45
1.14
|
0.780
1.98
|
279
415
|
131
59.42
|
5.4
13.72
|
|
| 596503 |
12
12
|
7
7
|
0.088
0.22
|
|
45
1.14
|
|
1x14
1x14
|
65
1.65
|
0.775
1.97
|
|
45
1.14
|
0.865
2.20
|
354
527
|
208
94.35
|
6.0
15.24
|
|
| 596503 |
12
12
|
7
7
|
0.088
0.22
|
|
45
1.14
|
|
1x14
1x14
|
65
1.65
|
0.775
1.97
|
|
45
1.14
|
0.865
2.20
|
354
527
|
208
94.35
|
6.0
15.24
|
|
| 582003 |
10
10
|
7
7
|
0.113
0.29
|
|
45
1.14
|
|
1x12
1x12
|
65
1.65
|
0.723
1.84
|
|
45
1.14
|
0.813
2.07
|
303
451
|
166
75.30
|
5.6
14.22
|
|
| 582003 |
10
10
|
7
7
|
0.113
0.29
|
|
45
1.14
|
|
1x12
1x12
|
65
1.65
|
0.723
1.84
|
|
45
1.14
|
0.813
2.07
|
303
451
|
166
75.30
|
5.6
14.22
|
|
| 568611 |
10
10
|
7
7
|
0.113
0.29
|
|
45
1.14
|
|
1x12
1x12
|
65
1.65
|
0.833
2.12
|
|
45
1.14
|
0.923
2.34
|
435
647
|
332
150.59
|
6.4
16.26
|
|
| Cond. Size (AWG/Kcmil) | DC Resistance @ 25C (ohms/1000') (ohms/km) | AC Resistance @ 75C (ohms/1000') (ohms/km) | Capacitive Reactance (Mohms x 1000ft) (Mohms x km) | Inductive Reactance (ohms/1000') (ohms/km) | Zero Sequence Impedance (ohms/1000') (ohms/1000') | Positive Sequence Impedance (ohms/1000') (ohms/1000') | Shield Short Circuit Current 6 Cycles (amps) | Direct Buried Ampacity @ 90C (amps) | Direct Buried Ampacity @ 105C (amps) | In Duct Ampacity @ 90C (amps) | In Duct Ampacity @ 105C (amps) | In Air Ampacity @ 90C (amps) | In Air Ampacity @ 105C (amps) | |
| 568448 |
14
14
|
2.631
3.92
|
3.17
4.72
|
|
0.058
0.09
|
|
|
|
|
|
|
|
|
|
| 596503 |
12
12
|
1.662
2.47
|
2.002
2.98
|
|
0.054
0.08
|
|
|
|
|
|
|
|
|
|
| 596503 |
12
12
|
1.662
2.47
|
2.002
2.98
|
|
0.054
0.08
|
|
|
|
|
|
|
|
|
|
| 582003 |
10
10
|
1.04
1.55
|
1.253
1.86
|
|
0.05
0.07
|
|
|
|
|
|
|
|
|
|
| 582003 |
10
10
|
1.04
1.55
|
1.253
1.86
|
|
0.05
0.07
|
|
|
|
|
|
|
|
|
|
| 568611 |
10
10
|
1.04
1.55
|
1.253
1.86
|
|
0.05
0.07
|
|
|
|
|
|
|
|
|
|
Standards & References
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- CSA C22.2 No. 174 Cables in Hazardous Locations
- CSA C22.2 No. 131 Type TECK 90 Cable
- CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
- CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
- CSA HL - for Hazardous Locations rating
- CSA SUN RES - for Sunlight Resistant rating
- CSA AG14 - Acid Gas Compliance
- IEEE 383 Flame Test (70,000 btu)
- IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
Construction
- Conductor: Class B stranded copper, compressed or compact, in accordance with ASTM B3 and B8.
- Insulation: Cross-Linked Polyethylene (XLPE), Colour Code: 2/C black, white; 3/C red, black, blue; 4/C red, black, blue, white
- Grounding Conductors: Uninsulated Class B stranded grounding conductor
- Inner Jacket: Black Polyvinyl Chloride (PVC)
- Armor: Aluminum Interlocked Armour (AIA)
- Overall Jacket: Black PVC (optional colours available)
Resources
There are no downloadable resources for this product.