SPEC: 10040
6-6-6-6 CU SERVICE ENTRANCE TYPE SER PVC JACKET 500 FT
Southwire #: 28164202
Application & Features
Southwire Type SER, service entrance cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SER may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating is 600 volts. SE cables are not permitted underground, with or without a raceway, per NEC 338.12(A)(2).
Specifications
| Cond. Size | 6 AWG 6 AWG | |
| Conductor Number | 3 3 | |
| Diameter Over Conductor (in) (cm) | 0.177 0.45 | inch cm |
| Cond. Strands | 7 7 | |
| Inner Layer Thickness (mils) (mm) | 45 1.14 | mils mm |
| Ground Size | 1x6 1x6 | |
| Num x Neutral Size | 1x6 1x6 | |
| Outer Layer Thickness (mils) (mm) | 30 0.76 | mils mm |
| Approx. OD (in) (cm) | 0.710 1.80 | inch cm |
| Approx. Weight (lbs/1000') (kgs/km) | 421 627 | lbs/1000' kgs/km |
Standards & References
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- UL 44 Thermoset-Insulated Wires and Cables
- UL 83 Thermoplastic Insulated Wires and Cables
- UL 854 Service Entrance Cable
- RoHS-2 (European Directive 2011/65/EU)
- NEC National Electrical Code NFPA 70
- Federal Specification A-A-59544
Construction
- Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8
- Insulation: All phases are insulated with Cross Linked Polyethylene (XLPE) Type XHHW-2 or Polyvinyl Chloride with Nylon Sheath THHN/THWN
- Neutral: Insulated bare soft annealed neutral
- Ground: Bare soft annealed ground
- Binder: Reinforcement binder
- Jacket: Gray Polyvinyl Chloride PVC jacket. Sunlight resistant.
Resources
There are no downloadable resources for this product.