SPEC: 10051
6-6-6 3E AL THHN SEU PVC JACKET 1000 FT
Southwire #: 13086401
Application & Features
Southwire Type SEU, service entrance cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SEU may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating is 600 volts. SE cables are not permitted underground, with or without a raceway, per NEC 338.12(A)(2).
Specifications
| Cond. Size | 6 AWG 6 AWG | |
| Conductor Number | 2 2 | |
| Cond. Strands | 7 7 | |
| Diameter Over Conductor (in) (cm) | 0.169 0.43 | inch cm |
| Inner Layer Thickness (mils) (mm) | 30 0.76 | mils mm |
| Num x Neutral Size | 1x6 1x6 | |
| Outer Layer Thickness (mils) (mm) | 30 0.76 | mils mm |
| Approx. OD (in) (cm) | 0.419 x 0.662 1.06 x 1.68 | inch cm |
| Aluminum Weight (lbs/1000') (kgs/km) | 74 110 | lbs/1000' kgs/km |
| Approx. Weight (lbs/1000') (kgs/km) | 140 208 | lbs/1000' kgs/km |
Standards & References
- ASTM B800 8000 Series Aluminum Alloy Wire
- ASTM B801 Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
- UL 44 Thermoset-Insulated Wires and Cables
- UL 83 Thermoplastic Insulated Wires and Cables
- UL 854 Service Entrance Cable
- RoHS-2 (European Directive 2011/65/EU)
- NEC National Electrical Code NFPA 70
- Federal Specification A-A-59544
Construction
- Conductor: Class B compact stranded bare aluminum Alumaflex per ASTM B800 and ASTM B801
- Insulation: All phases and neutral are insulated with Cross Linked Polyethylene (XLPE) Type XHHW-2 or Polyvinyl Chloride with Nylon Sheath THHN/THWN
- Neutral: Insulated bare soft annealed neutral
- Binder: Reinforcement binder
- Jacket: Gray Polyvinyl Chloride PVC jacket. Sunlight resistant.
Resources
There are no downloadable resources for this product.