12-19 SD CU T90/TWN75/THHN/THWN 600V GREEN 984 FT
Southwire #: 47208403
Copper Conductor, 600V, Thermoplastic-Insulated Cable, Rated TWN75.
Application
THHN, THWN-2, MTW - (UL) - suitable for dry locations not exceeding 90°C.
- For Gasoline and Oil Resistant II applications not to exceed 75°C.
- MTW (UL) - suitable for dry locations not exceeding 90°C. For wet locations, Gasoline and Oil Resistant II applications not to exceed 60°C.
- T90 Nylon c(UL) - cables are primarily intended for installation in conduit (raceways) as exposed wiring in dry locations not exceeding 90°C. TWN75 c(UL) - suitable for wet or dry locations at not more than 75°C.
- The maximum voltage rating for all intended applications is 600 volts.
- Minimum installation handling temperature is limited to -25°C. Minimum operating temperature limited to -40°C.
Specifications
| Size (AWG or kcmil) (mm2) | 12 AWG 12 AWG | |
| No. of Strands | 19 19 | |
| Insulation Thickness (mils) (mm) | 15 0.38 | mils mm |
| Jacket Thickness (mils) (mm) | 5 0.13 | mils mm |
| Nom. OD (mils) (mm) | 132 3.35 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 25 36 | lbs/1000' kgs/km |
| Allowable Ampacity at 60C | 20 20 | |
| Allowable Ampacity at 75C | 25 25 | |
| Allowable Ampacity at 90C | 30 30 |
+ Allowable ampacities are for general use as specified by the Canadian Electrical Code, Part 1, 2015, Table 2
Standards & References
Southwire’s SIMpull® THHN, THWN-2, MTW cables meet or exceed the following requirements:
- ASTM B3, B8 and B787
- Built to CSA C22.2 No.75, LL90458
- -25°C Cold Bend Test Compliant
- Canadian Electrical Code
- CSA FT-1 - Flame Test
- UL, c(UL) and CSA listed
Construction
- Southwire’s THHN, THWN-2, MTW cables are manufactured with annealed (soft) copper conductor and a tough, heat and moisture-resistant thermoplastic polyvinyl chloride (PVC) insulation.
- Manufactured using combination unilay stranding.
- Copper Conductor
Resources
There are no downloadable resources for this product.