High Voltage Cu 69kV Power Cable
Compact Cu smooth condutor shield, super clean XLPE insulation, true triple extrusion and dry cured, firmly bonded insualtion shield, Cu moisture impervious sheath, PE jacket with extruded semi-conductive outer layer.
Application & Features
Predominantly used for underground transmission in conduit systems, suitable for use in wet or dry locations, direct burial, underground duct, and where exposed to sunlight. To be used at 69,000 volts or less and at conductor temperatures not to exceed 90°C for normal operation.
Specifications
Select a set of products below for more information:
| Conductor | ||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | |
| More Options |
1
1
|
1250 KCMIL
1250 KCMIL
|
85
85
|
650
16.51
|
3335
84.73
|
8547
12719
|
| More Options |
5
5
|
3000 KCMIL
3000 KCMIL
|
306
306
|
650
16.51
|
4241
107.74
|
15347
22839
|
Standards & References
- ICEA S-108-720 AEIC CS9 - And IEC 60840 or 62067 upon request as applicable
Construction
Resources
There are no downloadable resources for this product.