SPEC46002 CU Compressed 2.4kV NLEPR Insulation SIM-PVC Jacket. MV 90

Type MV-90 Single Conductor Copper, No Lead Ethylene Propylene Rubber (NL-EPR) SIMpull Polyvinyl Chloride (PVC) Jacket

Download Category Specifications
PDF Excel Table

Application

Southwire’s 2.4KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation, 130°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend when UL listed. Rated at -25°C for cold bend and cold impact and marked with "LTDD" when CSA listed or dual UL/CSA listed. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications

Select a set of products below for more information:
Cond. Size (AWG/Kcmil) Cond. Strands Diameter Over Conductor (in) (cm) Diameter Over Insulation (in) (cm) Insulation Thickness (mils) (mm) Diameter Over Shield (in) (cm) Ground (No. x AWG) Inner Jacket Thickness (mils) (mm) Diameter Over Armor (in) (cm) Drain Wire Jacket Thickness (mils) (mm) Approx. OD (in) (cm) Approx. Weight (lbs/1000') (kgs/km) Max Pull Tension (lbs) (kg) Min. Bend Radius (in) (cm) Conduit Size (in) (cm)
607457
2 2
7 7
0.282 0.72
0.570 1.45
125 3.18
25 0.64
0.746 1.89
413 615
530 240.40
5.9 14.99
2.5 6.35
607465
1 1
19 19
0.322 0.82
0.610 1.55
125 3.18
85 2.16
0.786 2.00
484 720
669 303.45
6.2 15.75
2.5 6.35
607226
1/0 1/0
19 19
0.361 0.92
0.650 1.65
125 3.18
85 2.16
0.826 2.10
568 845
844 382.83
6.6 16.76
2.5 6.35
607234
2/0 2/0
19 19
0.405 1.03
0.695 1.77
125 3.18
85 2.16
0.871 2.21
671 999
1064 482.62
6.9 17.53
2.5 6.35
607242
3/0 3/0
19 19
0.456 1.16
0.745 1.89
125 3.18
105 2.67
0.955 2.43
830 1235
1342 608.72
7.6 19.30
3.0 7.62
607259
4/0 4/0
19 19
0.512 1.30
0.785 1.99
125 3.18
105 2.67
0.995 2.53
978 1455
1692 767.48
7.9 20.07
3.0 7.62
607267
250 250
37 37
0.558 1.42
0.870 2.21
140 3.56
120 3.05
1.112 2.82
1179 1755
2000 907.18
8.8 22.35
3.5 8.89
607283
350 350
37 37
0.661 1.68
0.965 2.45
140 3.56
120 3.05
1.207 3.07
1531 2278
2800 1270.06
9.6 24.38
3.5 8.89
607309
500 500
37 37
0.789 2.00
1.090 2.77
140 3.56
115 2.92
1.322 3.36
2039 3034
4000 1814.37
10.5 26.67
4.0 10.16
607119
750 750
61 61
0.968 2.46
1.335 3.39
155 3.94
135 3.43
1.611 4.09
3038 4521
6000 2721.55
12.8 32.51
4.5 11.43
607325
1000 1000
61 61
1.117 2.84
1.485 3.77
155 3.94
135 3.43
1.761 4.47
3893 5793
8000 3628.74
14.0 35.56
5.0 12.70
Cond. Size (AWG/Kcmil) DC Resistance @ 25C (ohms/1000') (ohms/km) AC Resistance @ 75C (ohms/1000') (ohms/km) Capacitive Reactance (Mohms x 1000ft) (Mohms x km) Inductive Reactance (ohms/1000') (ohms/km) Zero Sequence Impedance (ohms/1000') (ohms/1000') Positive Sequence Impedance (ohms/1000') (ohms/1000') Shield Short Circuit Current 6 Cycles (amps) Direct Buried Ampacity @ 90C (amps) Direct Buried Ampacity @ 105C (amps) In Duct Ampacity @ 90C (amps) In Duct Ampacity @ 105C (amps) In Air Ampacity @ 90C (amps) In Air Ampacity @ 105C (amps)
607457
2 2
0.162 0.24
0.204 0.30
0.0434 0.06
145 145
155 155
190 190
215 215
607465
1 1
0.128 0.19
0.162 0.24
0.0417 0.06
170 170
180 180
225 225
250 250
607226
1/0 1/0
0.102 0.15
0.128 0.19
0.0401 0.06
195 195
210 210
260 260
290 290
607234
2/0 2/0
0.081 0.12
0.102 0.15
0.0387 0.06
220 220
235 235
300 300
330 330
607242
3/0 3/0
0.064 0.10
0.081 0.12
0.0381 0.06
250 250
270 270
345 345
385 385
607259
4/0 4/0
0.051 0.08
0.065 0.10
0.0368 0.05
290 290
310 310
400 400
445 445
607267
250 250
0.043 0.06
0.056 0.08
0.0373 0.06
320 320
345 345
445 445
495 495
607283
350 350
0.031 0.05
0.041 0.06
0.0355 0.05
385 385
415 415
550 550
615 615
607309
500 500
0.022 0.03
0.03 0.04
0.0337 0.05
470 470
505 505
695 695
775 775
607119
750 750
0.014 0.02
0.023 0.03
0.0329 0.05
585 585
630 630
900 900
1000 1000
607325
1000 1000
0.011 0.02
0.019 0.03
0.0317 0.05
670 670
720 720
1075 1075
1200 1200

Standards & References

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
  • ASTM B496 Compact Round Concentric-lay-standard copper
  • UL 1072 Medium-Voltage Power Cables
  • UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test
  • ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
  • ICEA S-96-659 (NEMA WC 71) 2001-5000 V Nonshielded Cables
  • CT USE Sizes 1/0 AWG and Larger
  • Made in America: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661

Construction

  1. Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
  2. Conductor Shield: Semi-conducting cross-linked copolymer
  3. Insulation: No Lead Ethylene Propylene Rubber (NL-EPR)
  4. Overall Jacket: Polyvinyl Chloride (PVC)

Resources

There are no downloadable resources for this product.