SPEC47011 CU 600V Remote Power & Drill Cord Cable 90°C. MSHA Approved
Flexible Copper conductors, Ethylene Propylene Diene Monimor (EPDM) insulation, Extra Heavy Duty Two Layer Heavy-Duty Neoprene Jacket with Optional Reflective Stripes
Application
Southwire’s Remote Power and Drill cord cable is a heavy-duty cable for use where limited flexing and rugged use are re- quired. For use in stationary heavy duty pumps or long-wall lighting application. Designed for long service life in wet or dry locations in underground mines. The cable is sunlight resistant, crush resistant, and abrasion resistant. Also suitable for continuous submersion in water. Embossed print legend for easy cable identification.
Specifications
Select a set of products below for more information:
| Cond. Size (AWG/Kcmil) | Conductor Number | Cond. Strands | Diameter Over Conductor (in) (cm) | Insulation Thickness (mils) (mm) | Diameter Over Insulation (in) (cm) | Ground (No. x AWG) | Ground Check Size | Ground Check Strands | Ground Insulation Thickness (mils) (mm) | Inner Jacket Thickness (mils) (mm) | Diameter Over Armor (in) (cm) | Jacket Thickness (mils) (mm) | Approx. OD (in) (cm) | Approx. Weight (lbs/1000') (kgs/km) | |
| 571415 |
14
14
|
4.0
4.0
|
41
41
|
0.073
0.19
|
45
1.14
|
0.167
0.42
|
|
|
|
|
65
1.65
|
|
85
2.16
|
0.710
1.80
|
278
414
|
| 571402 |
12
12
|
5.0
5.0
|
65
65
|
0.094
0.24
|
45
1.14
|
0.184
0.47
|
|
|
|
|
65
1.65
|
|
100
2.54
|
0.830
2.11
|
398
592
|
| 571731 |
12
12
|
6.0
6.0
|
65
65
|
0.094
0.24
|
45
1.14
|
0.184
0.47
|
|
|
|
|
65
1.65
|
|
100
2.54
|
0.890
2.26
|
458
682
|
| 571710 |
10
10
|
5.0
5.0
|
104
104
|
0.117
0.30
|
45
1.14
|
0.205
0.52
|
|
|
|
|
65
1.65
|
|
95
2.41
|
0.900
2.29
|
492
732
|
| 583920 |
8
8
|
5.0
5.0
|
71
71
|
0.153
0.39
|
60
1.52
|
0.275
0.70
|
|
|
|
|
65
1.65
|
|
95
2.41
|
1.090
2.77
|
716
1066
|
| Cond. Size (AWG/Kcmil) | DC Resistance @ 25C (ohms/1000') (ohms/km) | AC Resistance @ 75C (ohms/1000') (ohms/km) | Capacitive Reactance (Mohms x 1000ft) (Mohms x km) | Inductive Reactance (ohms/1000') (ohms/km) | Rated Strength (lbs) (kg) | Max Pull Tension (lbs) (kg) | Min. Bend Radius (in) (cm) | In Air Ampacity @ 60C (amps) | In Air Ampacity @ 75C (amps) | In Air Ampacity @ 90C (amps) | In Air Ampacity @ 105C (amps) | Raceway Ampacity @ 75C (amps) | Raceway Ampacity @ 90C (amps) | |
| 571415 |
14
14
|
2.814
4.19
|
3.555
5.29
|
|
0.041
0.06
|
28
12.70
|
|
5.6
14.22
|
|
|
15
15
|
|
|
|
| 571402 |
12
12
|
1.774
2.64
|
2.241
3.33
|
|
0.037
0.06
|
44
19.96
|
|
6.6
16.76
|
|
|
20
20
|
|
|
|
| 571731 |
12
12
|
1.774
2.64
|
2.241
3.33
|
|
0.037
0.06
|
44
19.96
|
|
7.1
18.03
|
|
|
20
20
|
|
|
|
| 571710 |
10
10
|
1.111
1.65
|
1.404
2.09
|
|
0.035
0.05
|
70
31.75
|
|
7.2
18.29
|
|
|
25
25
|
|
|
|
| 583920 |
8
8
|
0.715
1.06
|
0.903
1.34
|
|
0.035
0.05
|
112
50.80
|
|
8.7
22.10
|
|
|
35
35
|
|
|
|
Standards & References
- ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
- ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines
Construction
- Conductor: Soft drawn, annealed, flexible, rope-lay stranded, uncoated copper per ASTM B3/B172.
- Separator Tape: Non-conducting tape applied as needed between the conductor and insulation to facilitate stripping
- Insulation: Ethylene Propylene Rubber (EPR). Color coded: 3-Conductor: Black, White, Green; 4 Conductor: Black, White, Red, Green; 5-Conductor: Black, White, Red, Green, Orange; 6-Conductor: Black, White, Red, Green, Orange, Blue
- Filler: Fillers as needed
- Inner Jacket: Black, heavy-duty integral fill flame resistant, thermosetting Neoprene
- Reinforcement: Reinforcing twine applied between the two jacket layers.
- Outer Jacket: Black, heavy-duty, integral fill, flame resistant, thermosetting Neoprene. Alternate jacket colors available.
Resources
There are no downloadable resources for this product.