SPEC45059 TCU 600 EPR Insulation XHHW-2 Thermoplastic CPE-TP Jacket. CT Rated - Sunlight Resistant - For Direct Burial - Silicone Free

Type TC-ER Control Cable 600Volt Tinned Copper Conductors, Ethylene Propylene Rubber (EPR) Insulation XHHW-2 Thermoplastic Chlorinated Polyethylene (CPE-TP) Jacket, Control Cable Conductor Identification Method 1 Table 1. CT Rated - Sunlight Resistant - Oil Resistant - For Direct Burial - VW-1 rated - Silicone Free

Download Category Specifications
PDF Excel Table

Application

Southwire’s 600 Volt Type TC-ER control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10. VW-1 rated - Sunlight Resistant - Oil Resistant - For Direct Burial - Silicone Free

Specifications

Select a set of products below for more information:
Cond. Size (AWG/Kcmil) Conductor Number Cond. Strands Diameter Over Conductor (in) (cm) Color Insulation Thickness (mils) (mm) Diameter Over Insulation (in) (cm) Ground (No. x AWG) Diameter Over Armor (in) (cm) Jacket Thickness (mils) (mm) Approx. OD (in) (cm) Copper Weight (lbs/1000') (kgs/km) Aluminum Weight (lbs/1000') (kgs/km) Approx. Weight (lbs/1000') (kgs/km) DC Resistance @ 25C (ohms/1000') (ohms/km) AC Resistance @ 75C (ohms/1000') (ohms/km) Min. Bend Radius (in) (cm) Raceway Ampacity @ 75C (amps) Raceway Ampacity @ 90C (amps)
599457
14 14
3.0 3.0
7 7
30 0.76
45 1.14
0.388 0.99
37 55
86 128
2.631 3.92
3.17 4.72
1.6 4.06
20 20
25 25
599458
14 14
4.0 4.0
7 7
30 0.76
45 1.14
0.423 1.07
50 74
107 159
2.631 3.92
3.17 4.72
1.7 4.32
16 16
20 20
599459
14 14
5.0 5.0
7 7
30 0.76
45 1.14
0.461 1.17
62 92
129 192
2.631 3.92
3.17 4.72
1.8 4.57
16 16
20 20
595479
14 14
7.0 7.0
7 7
30 0.76
45 1.14
0.502 1.28
87 129
170 253
2.631 3.92
3.17 4.72
2.0 5.08
14 14
17 17
599460
14 14
9.0 9.0
7 7
30 0.76
60 1.52
0.616 1.56
112 167
232 345
2.631 3.92
3.17 4.72
2.5 6.35
14 14
17 17
599461
14 14
12.0 12.0
7 7
30 0.76
60 1.52
0.692 1.76
150 223
299 445
2.631 3.92
3.17 4.72
2.8 7.11
10 10
12 12
595475
14 14
19.0 19.0
7 7
30 0.76
60 1.52
0.804 2.04
237 353
434 646
2.631 3.92
3.17 4.72
3.2 8.13
10 10
12 12
595635
12 12
2.0 2.0
7 7
30 0.76
45 1.14
0.466 1.18
40 60
86 128
1.662 2.47
2.002 2.98
1.9 4.83
25 25
30 30
595472
12 12
3.0 3.0
7 7
30 0.76
45 1.14
0.466 1.18
61 91
115 171
1.662 2.47
2.002 2.98
1.9 4.83
25 25
30 30
595636
12 12
4.0 4.0
7 7
30 0.76
45 1.14
0.466 1.18
81 121
148 220
1.662 2.47
2.002 2.98
1.9 4.83
20 20
24 24
592111
12 12
5.0 5.0
7 7
30 0.76
45 1.14
0.543 1.38
101 150
198 295
1.662 2.47
2.002 2.98
2.2 5.59
20 20
24 24
596919
12 12
9.0 9.0
7 7
30 0.76
60 1.52
0.589 1.50
183 272
319 475
1.662 2.47
2.002 2.98
2.4 6.10
17 17
21 21
595477
12 12
12.0 12.0
7 7
30 0.76
60 1.52
0.466 1.18
244 363
410 610
1.662 2.47
2.002 2.98
1.9 4.83
12 12
15 15
595632
10 10
2.0 2.0
7 7
30 0.76
45 1.14
0.466 1.18
64 95
116 173
1.04 1.55
1.253 1.86
1.9 4.83
35 35
40 40
595556
10 10
3.0 3.0
7 7
30 0.76
45 1.14
0.478 1.21
97 144
161 240
1.04 1.55
1.253 1.86
1.9 4.83
35 35
40 40
595633
10 10
4.0 4.0
7 7
30 0.76
45 1.14
0.556 1.41
129 192
223 332
1.04 1.55
1.253 1.86
2.2 5.59
28 28
32 32
645726
10 10
12.0 12.0
7 7
30 0.76
80 2.03
0.466 1.18
388 577
615 915
1.04 1.55
1.253 1.86
1.9 4.83
17 17
20 20

Standards & References

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
  • UL 44 Thermoset-Insulated Wires and Cables
  • UL 44 VW-1 Vertical flame test on individual conductors
  • UL 1277 Electrical Power and Control Tray Cables
  • UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
  • ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 1
  • ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables
  • ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
  • IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test

Construction

  1. Conductor: 7 strands class B compressed tinned copper per ASTM B33 and ASTM B8
  2. Insulation: Ethylene Propylene Rubber (EPR) XHHW-2, 30 Mils thick for all cable sizes
  3. Overall Jacket: Thermoplastic Chlorinated Polyethylene (CPE-TP) Jacket

Resources

There are no downloadable resources for this product.