1" FLEXIBLE NONMETALLIC CONDUIT W/SIM GRAY 100 FT

Type NM SIMpull™ NMLT is suitable for the following installations:

• For the installation and protection of electrical conductors
• Where the conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather
• Motor circuits - for conductors of motor feeders, branch and control circuits
• Used in industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment
• Exposed or concealed installations
• Applications requiring movement, crossover connections, or tight bends
• For direct burial and encased in concrete
• For flexible connections to swimming pool, spa, and hot tub motors per NEC® 680.21(A)(3) & 680.42(A)(1)
• Electric signs and outline lighting supply and secondary-circuit conductors per NEC® 600.7, 600.31 (1000 volts or less) & 600.32 (over 1000 volts)
• Floating building feeders and services per NEC® 553.7
• Boatyards & Marinas in accordance with NEC® 555.1
• Cranes & Hoists in accordance with NEC® 610.11(C)
• Under raised floors in information technology equipment conductors and cables in accordance with NEC® 645.5 (D) & 645.5(D)(2)
• For Elevator, Dumbwaiters, Escalators, Moving Walks, Wheel Chair Lifts & Stairway Chair Lifts in accordance with NEC® 620.21 (where expressly permitted)
• Service entrance in lengths up to six feet per NEC® 230.43(15)
• For containment of 600 Volt and lower potential circuits
• Approved for use in lengths longer than 6 feet per NEC® 356.10(5)

• UL 1660 Liquid-Tight Flexible Nonmetallic Conduit
• CSA C22.2 No. 227.2.1 Liquid-Tight Flexible Non-Metallic Conduit
• NFPA 70 (National Electrical Code), Article 356 - Liquidtight flexible nonmetallic conduit
• REACH - European Community Regulation