MC-EZQ Wp12/4SolTHHN BkWeRdBe AA 25' 10e 10 EAMC-EZQ Wp12/4SolTHHN BkWeRdBe AA 25' 10e 10 EA
Southwire #: 56485825
12/4 AWG THHN/THWN Insulated Singles. Green Insulated Ground. UL Listed. 600 Volts. Rated VW-1. Lightweight Aluminum Interlocked Armor. Includes UL Listed Fittings and Prepared Cable Ends.
Select Product Specifications
Construction
Packaging
Application & Features
Southwire EZ-QUICKTM Modular Cable Assemblies are suitable for use as follows:
- Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.
- Fished or embedded in plaster
- Concealed or exposed installations.
- Environmental air-handling spaces per NEC 300.22 (C).
- Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
- Installation in cable tray and approved raceways.
- Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
- Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.
Specifications
| No. of Conductors | 4 4 | |
| Size (AWG or kcmil) (mm2) | 12 null 12 null | |
| No. of Strands | 0 0 | |
| Insulation Thickness (mils) (mm) | 15 0.38 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 4 6 | lbs/1000' kgs/km |
Standards & References
Southwire EZ-QUICKTM Modular Cable Assemblies meet or exceed the requirements of the following:
- UL 83
- UL 1569
- UL 1685
- UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
- Federal Specification A-A59544 (formerly J-C-30B)
- FT4/IEEE 1202 (70,000 Btu/hr) Vertical Cable Tray Flame Test
- NFPA 70 (National Electrical Code), Article 330
- Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems
- REACH/RoHS-2 (Chemical Limit) Compliant
Construction
Southwire Armorlite® Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90°C dry available in sizes 14 AWG through 10 AWG, and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the cable assembly. Metal Clad Cable is cut to length and ends are prepared for installation.
Resources
There are no downloadable resources for this product.