10-8 CU STR THHN 8X10NEUT 1X10GG AIA MC 1000 FT
10/8 AWG Type THHN/THWN Insulated Copper Singles. Sizes 18 & 16 AWG Type TFN Insulated Copper Singles. Green Insulated or Tinned Copper Grounding Conductor. UL Listed as Type MC and Type FPLP. 600 Volt Type MC and 300 Volt Type FPLP. Rated VW-1. Red Lightweight Aluminum Interlocked Armor.
Application & Features
Southwire Armorlite® Type MC Cable –Neutral Per Phase is suitable for use as follows:
- Applications affected by harmonics generated from non-linear switching loads, such as computers, variable frequency drives, electrical test equipment, and officeequipment.
- Branch, feeder and service power distribution in commercial, industrial, institutional, and multiresidential buildings.
- Fished or embedded in plaster.
- Concealed or exposed installations.
- Compliance with NEC 210.7 for multiple branch circuits
- Environmental air-handling spaces per NEC 300.22 (C).
- Places of Assembly per NEC 518.4 and theaters per NEC520.5.
- Installation in cable tray and approvedraceways.
- Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
- Class I Div. 2, Class II Div 2, & Class III Div. 1 HazardousLocations.
Specifications
| No. of Conductors | 16 16 | |
| Size (AWG or kcmil) (mm2) | 10 AWG 10 AWG | |
| No. of Strands | 19 19 | |
| Insulation Thickness (mils) (mm) | 20 0.51 | mils mm |
| Size (AWG) | 10 10 | |
| Nom. OD (mils) (mm) | 1023 25.98 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 769 1144 | lbs/1000' kgs/km |
Standards & References
Southwire Armorlite® Type MC Cable – Neutral Per Phase meets or exceeds the following requirements:
- UL 83
- UL 1569
- UL 1685
- UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
- Federal Specification A-A59544 (formerly J-C-30B)
- NFPA 70 (National Electrical Code), Article 330
- Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems
- Jacketed & Non Jacketed will both pass " UL Test" & "FT4/IEEE 1202" (70,000 Btu/hr) VerticalCable Tray Flame Test
- REACH/RoHS-2 (Chemical Limit) Compliant
Construction
Red Alert® Type MC - FPLP Cable is constructed with soft-drawn copper conductors and insulated with flame-retardant and heat-resistant PVC with an outer oil- and gasoline-resistant nylon jacket. Type THHN/THWN conductors are provided for sizes 14 AWG and 12 AWG cables Type TFN conductors are provided for sizes 18 AWG and 16 AWG cables. The circuit conductors and a green insulated grounding conductor are cabled together and a polypropylene tape is wrapped around the assembly. Upon request, an optional Film/Foil Aluminum Laminate Shielding Tape with a tinned copper drain wire/grounding conductor is wrapped over the conductor assembly. Aluminum interlocking armor Red in color is applied over the assembly. Multiple twisted (cabled) conductor pairs/groups with optional shield(s) are available. The cable is dual rated as 90°C dry, 600 Volt Type MC and 105°C dry, 300 Volt Type FPLP cable.