500 AL 600VUD TX RIDER/YS/USE-2 1000 FT
Southwire #: 27273201
Aluminum Conductors. Cross-linked Polyethylene (XLP) Insulation.
Select Product Specifications
Construction
Conductor Color
Packaging
Application & Features
Used for secondary distribution and underground service at 600 volts or less, either direct burial or in ducts.
Specifications
| No. of Conductors | 3 3 | |
| Size (AWG or kcmil) (mm2) | 500 KCMIL 500 KCMIL | |
| No. of Strands | 34 34 | |
| Insulation Thickness (mils) (mm) | 95 2.41 | mils mm |
| Nom. OD (mils) (mm) | 2052 52.12 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 1592 2369 | lbs/1000' kgs/km |
Standards & References
Southwire's triplex or paralleled 600 volt secondary UD cable meets or exceeds the following applicable ASTM specifications:
- B-230 Aluminum 1350-H19 Wire for Electrical Purposes.
- B-231 Aluminum 1350 Conductors, Concentric-Lay-Stranded.
Construction
Conductors are stranded, compressed 1350-H19, H16, or H26 aluminum, insulated with vulcanized interlinked polyethylene (VIP 1 ), Southwire's cross-linked polyethylene. Neutrals are triple yellow extruded stripe. Cables with "YES" neutrals have sequential footage markers. Conductors are durably surface printed for identification. Two phase conductors and one neutral conductor are cabled together to produce the triplex cable configuration. Conductors are also available paralleled.
- 1350
Resources
There are no downloadable resources for this product.