SPEC 46255 CU Compressed 5/8kV NLEPR Insulation 133/100% IL ARMOR-X® PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial - VFD Cable
Type MV-105 Three Conductor Copper, 115 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, Continuous Corrugated Welded Aluminum Armor - ARMOR-X®, Polyvinyl Chloride (PVC) Jacket. Suitable for VFD Applications. Type MC HL. Silicone Free
Application
Southwire’s 5KV ARMOR-X® MC HL are armored cables for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, 250°C for short circuit conditions, and -50°C for cold bend. For uses in Class I, II, and III, Division 1 and 2 hazardous locations per NEC Article 501, 502, and 503. Suitable for VFD application.
Specifications
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 890636 |
3
3
|
2 AWG
2 AWG
|
7
7
|
|
10
10
|
|
1796
45.62
|
1869
2781
|
|
| 890638 |
3
3
|
1/0 AWG
1/0 AWG
|
19
19
|
|
8
8
|
|
2166
55.02
|
2531
3766
|
|
| 890639 |
3
3
|
2/0 AWG
2/0 AWG
|
19
19
|
|
8
8
|
|
2166
55.02
|
2806
4176
|
|
| 890640 |
3
3
|
4/0 AWG
4/0 AWG
|
19
19
|
|
6
6
|
|
2448
62.18
|
3997
5948
|
|
| 890641 |
3
3
|
250 KCMIL
250 KCMIL
|
37
37
|
|
6
6
|
|
2448
62.18
|
4702
6998
|
|
| 890642 |
3
3
|
350 KCMIL
350 KCMIL
|
37
37
|
|
6
6
|
|
2708
68.78
|
5913
8799
|
|
| 890643 |
3
3
|
500 KCMIL
500 KCMIL
|
37
37
|
|
4
4
|
|
3038
77.17
|
7546
11229
|
|
| 890644 |
3
3
|
750 KCMIL
750 KCMIL
|
61
61
|
|
4
4
|
|
3718
94.44
|
10630
15820
|
|
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- UL 1072: Medium-Voltage Power Cables
- UL 1569: Metal-Clad Cables
- UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
- UL 2225: Cables and Cable-Fittings For Use In Hazardous (Classified) Locations
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- ICEA S-97-682: Standard for Shielded Utility Cable Rated for 5 - 46kV
- IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
- AEIC CS-8: Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction
- Conductor: Class B compressed stranded bare copper per ASTM B3 and B8 (Tinned Copper per ASTM B33 optional)
- Conductor Shield: Semi-conducting cross-linked copolymer
- Insulation: 115 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level
- Insulation Shield: Strippable semi-conducting cross-linked copolymer
- Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
- Grounding Conductor: 3 Class B compressed stranded bare copper ground per ASTM B3 and B8 (Tinned Copper per ASTM B33 optional)
- Filler: Wax paper filler
- Binder: Polypropylene tape
- Armor: ARMOR-X Continuous Corrugated Welded Aluminum Armor
- Overall Jacket: Polyvinyl Chloride (PVC)
Resources
There are no downloadable resources for this product.