4-4-6 CU XHHW SEU PVC JACKET 1000 FT
Southwire #: 13082301
Service Entrance Cable SE type U. Service Entrance Cable, 600 Volt. Individual Conductors Rated XHHW-2. Jacket and Individual Conductors Sunlight Resistant.
Application
Southwire® Type SEU cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SEU may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating is 600 volts.
Specifications
| Size (AWG or kcmil) (mm2) | 4 AWG 4 AWG | |
| No. of Conductors | 2 2 | |
| No. of Strands | 7 7 | |
| Size (AWG) | 6 6 | |
| No. of Neutrals | 1 1 | |
| No. of Strands | 12 12 | |
| Nom. Width (mils) (mm) | 819 20.80 | mils mm |
| Nom. Height (mils) (mm) | 500 12.70 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 431 642 | lbs/1000' kgs/km |
| Insulation Thickness (mils) (mm) | 45 1.14 | mils mm |
| Allowable Ampacity at 60C | 70 70 | |
| Allowable Ampacity at 75C | 85 85 | |
| Allowable Ampacity at 90C | 95 95 | |
| Allowable Ampacity in Dwelling | 100 100 |
Standards & References
- ASTM- All applicable standards
- UL Standard 44 for XHHW-2 conductors
- UL Standard 83 for THHN/THWN conductors
- UL Standard 854
- Federal Specification A-A-59544
- National Electrical Code, NFPA 70. 2011 Edition
- RoHS/ REACH
Construction
- Southwire® style SEU cable is constructed with sunlight resistant Type XHHW-2 conductors or Type THHN/THWN conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant gray polyvinyl chloride (PVC). Available as 1 or 2 conductor with a concentric ground. SEU cable is jacketed with gray sunlight resistant polyvinyl chloride (PVC).
Resources
There are no downloadable resources for this product.