SPEC: 10054
2-2-4-6 3E AL USE-2 RHH RHW-2 MOBILE HOME FEEDER 500 FT
Southwire #: 30163001
Select Product Specifications
Construction
Conductor Color
Packaging
Application & Features
Southwire mobile home feeder is intended for the connection of mobile homes to a supply of electricity where permanent wiring is required as specified in the National Electrical Code. Suitable for direct burial in earth at conductor temperatures not to exceed 90°C. Voltage rating is 600 volts.
Specifications
| Cond. Size | 2 AWG 2 AWG | |
| Conductor Number | 2 2 | |
| Cond. Strands | 7 7 | |
| Diameter Over Conductor (in) (cm) | 0.268 0.68 | inch cm |
| Inner Layer Thickness (mils) (mm) | 60 1.52 | mils mm |
| Ground Size | 1x6 1x6 | |
| Approx. OD (in) (cm) | 0.951 2.42 | inch cm |
| Aluminum Weight (lbs/1000') (kgs/km) | 189 281 | lbs/1000' kgs/km |
| Approx. Weight (lbs/1000') (kgs/km) | 305 454 | lbs/1000' kgs/km |
* Strand count meets minimum number per ASTM
Standards & References
- ASTM B800 8000 Series Aluminum Alloy Wire
- ASTM B801 Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
- UL 44 Thermoset-Insulated Wires and Cables
- UL 854 Service Entrance Cable
- RoHS-2 (European Directive 2011/65/EU)
- NEC National Electrical Code NFPA 70
- Federal Specification A-A-59544
Construction
- Conductor: Class B compact stranded bare aluminum Alumaflex® per ASTM B800 and ASTM B801
- Ground: Green insulated aluminum ground
- Neutral: Black with White stripe
- Insulation: All phases are plexed and insulated with Cross Linked Polyethylene (XLPE) Type RHH/RHW-2 or USE-2
Resources
There are no downloadable resources for this product.