15kV AAAC CAMV™ Tree Wire

Aluminum Conductors. Track-Resistant HD Polyethylene or Track-Resistant Crosslinked Polyethylene Covering.
Download Category Specifications:
PDF Excel Table

Application

Used for primary and secondary overhead distribution where limited space is available or desirable for rights of way. Installed as an uninsulated conductor; however, covering is effective in preventing direct shorts and instantaneous flashovers should tree limbs or other objects contact conductors in such close proximity. The resulting close-proximity configuration minimizes the amount of space and hardware required for line installation; particularly useful in congested areas such as alleyways or tight corridors.

Specifications

measurement
imperial metric
Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
604019 1 1 77.47 KCMIL 77.47 KCMIL 7 7 645 16.40 176 261
142448 1 1 123.3 KCMIL 123.3 KCMIL 7 7 728 18.49 236 351
195669 1 1 246.9 KCMIL 246.9 KCMIL 7 7 863 21.93 385 574
142869 1 1 559.5 KCMIL 559.5 KCMIL 19 19 1158 29.41 740 1101
622447 1 1 652.4 KCMIL 652.4 KCMIL 19 19 1266 32.17 853 1270

Standards & References

Southwire’s 15kV – 35kV covered multi-layer tree wire meets or exceeds all applicable ICEA specifications and the following ASTM specifications:

  • ASTM B230
  • ASTM B231

Construction

Conductors are concentrically stranded, AAC (1350-H19), either compressed or full compact depending on conductor size, AAAC. Available with high-density track-resistant polyethylene.

  • 6201

Resources

There are no downloadable resources for this product.