15kV ACSR CAMV™ Tree Wire

Aluminum Conductors. Track-Resistant HD Polyethylene or Track-Resistant Crosslinked Polyethylene Covering.
Download Category Specifications:
PDF Excel Table

Application

Used for primary and secondary overhead distribution where limited space is available or desirable for rights of way. Installed as an uninsulated conductor; however, covering is effective in preventing direct shorts and instantaneous flashovers should tree limbs or other objects contact conductors in such close proximity. The resulting close-proximity configuration minimizes the amount of space and hardware required for line installation; particularly useful in congested areas such as alleyways or tight corridors.

Specifications

measurement
imperial metric
Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
143602 1 1 2 AWG 2 AWG 6 6 645 16.40 200 298
194464 1 1 1/0 AWG 1/0 AWG 6 6 728 18.49 276 410
661323 1 1 2/0 AWG 2/0 AWG 6 6 776 19.73 326 485
306555 1 1 3/0 AWG 3/0 AWG 6 6 846 21.50 383 570
604467 1 1 4/0 AWG 4/0 AWG 6 6 893 22.69 466 693
305037 1 1 336.4 KCMIL 336.4 KCMIL 18 18 1023 25.98 559 832
662277 1 1 556.5 KCMIL 556.5 KCMIL 24 24 1213 30.83 921 1371

Standards & References

Southwire’s 15kV – 35kV covered multi-layer tree wire meets or exceeds all applicable ICEA specifications and the following ASTM specifications:

  • ASTM B230
  • ASTM B231

Construction

Conductors are concentrically stranded, AAC (1350-H19), either compressed or full compact depending on conductor size, ACSR. Available with high-density track-resistant polyethylene.

  • ACSR

Resources

There are no downloadable resources for this product.