CU Compressed 2.4kV XLPE Insulation. Hi Randy
Type MV-90 Dry Single Conductor Copper, Non-Shielded Cross Linked Polyethylene (XLPE). Silicone Free
Application & Features
Southwire’s 2.4KV XLPE cables are suited for use in dry areas, conduits, ducts, troughs, trays and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation, 130°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend when UL listed. Rated at -25°C for cold bend and cold impact and marked with "LTDD" when CSA listed or dual UL/CSA listed. Rated for 1000 lbs./FT maximum sidewall pressure. Silicone Free.
Specifications
| Cond. Size | Cond. Strands | Diameter Over Conductor (in) (cm) | Inner Layer Thickness (mils) (mm) | Approx. OD (in) (cm) | Approx. Weight (lbs/1000') (kgs/km) | Max Pull Tension (lbs) (kg) | Min. Bend Radius (in) (cm) | Conduit Size (in) (cm) | |
| More Options |
6 AWG
6 AWG
|
7
7
|
0.174
0.44
|
110
2.79
|
0.430
1.09
|
137
204
|
210
95.25
|
3.4
8.64
|
1.5
3.81
|
| More Options |
4 AWG
4 AWG
|
7
7
|
0.225
0.57
|
110
2.79
|
0.481
1.22
|
215
320
|
334
151.50
|
3.8
9.65
|
1.5
3.81
|
| More Options |
2 AWG
2 AWG
|
7
7
|
0.283
0.72
|
110
2.79
|
0.537
1.36
|
313
466
|
531
240.86
|
4.3
10.92
|
1.5
3.81
|
| Cond. Size | DC Resistance at 25C (ohms/1000') (ohms/km) | AC Resistance at 75C (ohms/1000') (ohms/km) | Inductive Reactance (ohms/1000') (ohms/km) | Allowable Ampacity In Duct 90C | Allowable Ampacity In Air 90C | |
| More Options |
6 AWG
6 AWG
|
0.411
0.61
|
0.515
0.77
|
0.042
0.06
|
85
85
|
110
110
|
| More Options |
4 AWG
4 AWG
|
0.258
0.38
|
0.323
0.48
|
0.039
0.06
|
110
110
|
145
145
|
| More Options |
2 AWG
2 AWG
|
0.162
0.24
|
0.203
0.30
|
0.036
0.05
|
145
145
|
190
190
|
* NEC ampacities are based on:
* For Duct: Table 310.60(C)(11) Detail 1.
* For Free Air: Table 310.60(C)(3).
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
Standards & References
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- UL 1072 Medium-Voltage Power Cables
- ICEA S-96-659 (NEMA WC 71) 2001-5000 V Nonshielded Cables
- Made in America: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction
- Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
- Conductor Shield: Semi-conducting cross-linked copolymer
- Insulation: Cross Linked Polyethylene (XLPE)