SPEC45158 CU 600V PVC-Nylon Insulation PVC Jacket THHN/THWN-2 Shielded. CT Rated - Sunlight Resistant - For Direct Burial - Silicone Free
Type TC-ER, PLTC, FPL, and NFPL Control Cable 600 Volt Copper Conductors, Polyvinyl Chloride (PVC) with nylon layer Insulation THHN/THWN Polyvinyl Chloride (PVC) Jacket, Shielded Control Cable Conductor Identification Method 1 Table 2
Application
Southwire’s Type TC-ER, PLTC, FPL, and NFPL Control Cable are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C in dry locations and 75°C in wet locations, 105°C for emergency overload, and 150°C for short circuit conditions. For uses in Class I, II, and III per NEC Article 725 and 760. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10. Oil and sunlight resistant.
Specifications
Select a set of products below for more information:
| Cond. Size (AWG/Kcmil) | Conductor Number | Cond. Strands | Diameter Over Conductor (in) (cm) | Color | Insulation Thickness (mils) (mm) | Diameter Over Insulation (in) (cm) | Ground (No. x AWG) | Diameter Over Armor (in) (cm) | Jacket Thickness (mils) (mm) | Approx. OD (in) (cm) | Copper Weight (lbs/1000') (kgs/km) | Aluminum Weight (lbs/1000') (kgs/km) | Approx. Weight (lbs/1000') (kgs/km) | DC Resistance @ 25C (ohms/1000') (ohms/km) | AC Resistance @ 75C (ohms/1000') (ohms/km) | Min. Bend Radius (in) (cm) | Raceway Ampacity @ 75C (amps) | Raceway Ampacity @ 90C (amps) | |
| 581276 |
14
14
|
2.0
2.0
|
7
7
|
|
|
15
0.38
|
|
|
|
45
1.14
|
0.323
0.82
|
33
49
|
|
66
98
|
2.631
3.92
|
3.17
4.72
|
1.3
3.30
|
20
20
|
25
25
|
| 581600 |
12
12
|
4.0
4.0
|
7
7
|
|
|
15
0.38
|
|
|
|
45
1.14
|
0.422
1.07
|
93
138
|
|
148
220
|
1.662
2.47
|
2.002
2.98
|
1.7
4.32
|
20
20
|
24
24
|
| 581567 |
10
10
|
5.0
5.0
|
7
7
|
|
|
20
0.51
|
|
|
|
45
1.14
|
0.588
1.49
|
182
271
|
|
288
429
|
1.04
1.55
|
1.253
1.86
|
2.4
6.10
|
28
28
|
32
32
|
| 581565 |
12
12
|
12.0
12.0
|
7
7
|
|
|
20
0.51
|
|
|
|
60
1.52
|
0.686
1.74
|
257
382
|
|
390
580
|
1.662
2.47
|
2.002
2.98
|
2.7
6.86
|
12
12
|
15
15
|
Standards & References
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- UL 13 Power-Limited Circuit Cables
- UL 83 Thermoplastic Insulated Wires and Cables
- UL 1277 TC-ER
- UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables
- ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
- EPA 40 CFR, Part 26, Subpart C heavy metals per Table 1, TCLP method
Construction
- Conductor: 7 strands class B compressed bare copper per ASTM B3 and ASTM B8
- Insulation: Polyvinyl Chloride (PVC) with nylon layer Type THHN/THWN
- Drain Wire: Tinned copper
- Shielding: 100% coverage aluminum foil
- Jacket: Polyvinyl Chloride (PVC) Jacket
Resources
There are no downloadable resources for this product.