4/0-19 CU USE-2 RHH-RHW-2 600V WHITE
Southwire #: 56422599
Underground Service Entrance Cable. 600 Volt. Copper Conductors. Cross-Linked Polyethylene (XLP) Insulation. High-Heat, Moisture, and Sunlight Resistant.
Application
Southwire® Type USE-2 conductors are used with conduit as specified in the 2011 National Electrical Code. When used as Type USE-2, conductor is suitable for use as underground service entrance cable for direct burial at conductor temperatures not to exceed 90° C. When used as RHH, conductor temperatures shall not exceed 90°C in dry locations. When used as RHW-2 or USE-2, conductor temperatures shall not exceed 90°C in wet or dry locations. Voltage rating for USE-2 conductors is 600 volts.
Specifications
| Size (AWG or kcmil) (mm2) | 4/0 AWG 4/0 AWG | |
| No. of Strands | 19 19 | |
| Nom. OD (mils) (mm) | 678 17.22 | mils mm |
| Insulation Thickness (mils) (mm) | 80 2.03 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 728 1084 | lbs/1000' kgs/km |
| Allowable Ampacity at 60C | 195 195 | |
| Allowable Ampacity at 75C | 230 230 | |
| Allowable Ampacity at 90C | 260 260 |
Standards & References
Southwire® USE-2 comply with the following:
- ASTM - B3 and B787
- UL Standard 854 for USE-2
- Federal Specification A-A-59544
- National Electrical Code, NFPA 70 - 2011 Edition
- NEMA WC 70 Construction Requirements
- RoHS/REACH Compliant
Construction
Southwire® Type USE-2 copper conductors are annealed (soft) copper. Insulation is an abrasion, moisture, heat, and sunlight resistant black crosslinked polyethylene (XLP).
