6-2 CU NMD-90 RED JACKET W/G CSA 984 FT
Southwire #: 55788103
COPPER CONDUCTORS,300 VOLTS / -25ºC MIN, 90ºC MAX, PVC / NYLON INSULATION, PVC JACKET.
Application
Southwire's Romex® SIMpull ® NMD90 cables may be used for both exposed work in dry locations or concealed work in dry or damp locations.
- The maximum allowable conductor temperature is 90°C.
- The minimum recommended installation temperature is -25°C for two-conductor cables (with suitable handling procedures).
- Material should be properly stored above 0°C for 24 hours prior to installation.
- The maximum voltage rating for all intended applications is 300 volts.
Specifications
| Size (AWG or kcmil) (mm2) | 6 AWG 6 AWG | |
| No. of Conductors | 2 2 | |
| No. of Strands | 7 7 | |
| Size (AWG) | 8 8 | |
| Jacket Thickness (mils) (mm) | 45 1.14 | mils mm |
| Nom. Height (mils) (mm) | 374 9.50 | mils mm |
| Nom. Width (mils) (mm) | 800 20.32 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 340 506 | lbs/1000' kgs/km |
| Allowable Ampacity at 30°C Ambient | 75 75 |
* In accordance with the 2015 Canadian Electrical Code Part I Rule 14-104(2)
Standards & References
Romex® SIMpull ® NMD90 cables meet or exceed the following requirements:
- ASTM
- CSA C22.2 No. 48 (non-metallic sheathed cable)
- Canadian Electrical Code1
Construction
- Two-conductor cable with a bare grounding conductor.
- It is manufactured using annealed (soft) copper conductors—compressed standing for stranded conductors; a heat-resistant thermoplastic polyvinyl chloride (PVC) insulation and nylon jacket for the individual conductors with a PVC jacket for the overall construction.
- Romex® SIMpull ® NMD90 conductors feature SIM Technology jackets which reduces the coefficient of friction, allowing cables to be installed without external lubricants, resulting in reduced labour and materials costs.
Resources
There are no downloadable resources for this product.