SPEC: 47011
CU 600V Remote Power & Drill Cord Cable 90°C. MSHA Approved
Flexible Copper conductors, Ethylene Propylene Diene Monimor (EPDM) insulation, Extra Heavy Duty Two Layer Heavy-Duty Neoprene Jacket with Optional Reflective Stripes
Application & Features
Southwire’s Remote Power and Drill cord cable is a heavy-duty cable for use where limited flexing and rugged use are re- quired. For use in stationary heavy duty pumps or long-wall lighting application. Designed for long service life in wet or dry locations in underground mines. The cable is sunlight resistant, crush resistant, and abrasion resistant. Also suitable for continuous submersion in water. Embossed print legend for easy cable identification.
Specifications
Select a set of products below for more information:
| Cond. Size | Conductor Number | Cond. Strands | Diameter Over Conductor (in) (cm) | Inner Layer Thickness (mils) (mm) | Diameter Over Insulation (in) (cm) | Inner Jacket Thickness (mils) (mm) | Outer Layer Thickness (mils) (mm) | Approx. OD (in) (cm) | Approx. Weight (lbs/1000') (kgs/km) | |
| More Options |
14 AWG
14 AWG
|
4.0
4.0
|
41
41
|
0.073
0.19
|
45
1.14
|
0.167
0.42
|
65
1.65
|
85
2.16
|
0.710
1.80
|
278
414
|
| More Options |
12 AWG
12 AWG
|
5.0
5.0
|
65
65
|
0.094
0.24
|
45
1.14
|
0.184
0.47
|
65
1.65
|
100
2.54
|
0.830
2.11
|
398
592
|
| More Options |
12 AWG
12 AWG
|
6.0
6.0
|
65
65
|
0.094
0.24
|
45
1.14
|
0.184
0.47
|
65
1.65
|
100
2.54
|
0.890
2.26
|
458
682
|
| More Options |
10 AWG
10 AWG
|
5.0
5.0
|
104
104
|
0.117
0.30
|
45
1.14
|
0.205
0.52
|
65
1.65
|
95
2.41
|
0.900
2.29
|
492
732
|
| More Options |
8 AWG
8 AWG
|
5.0
5.0
|
71
71
|
0.153
0.39
|
60
1.52
|
0.275
0.70
|
65
1.65
|
95
2.41
|
1.090
2.77
|
716
1066
|
| Cond. Size | DC Resistance at 25C (ohms/1000') (ohms/km) | AC Resistance at 75C (ohms/1000') (ohms/km) | Inductive Reactance (ohms/1000') (ohms/km) | Rated Strength (lbs) (kg) | Min. Bend Radius (in) (cm) | Allowable Ampacity In Air 90C | |
| More Options |
14 AWG
14 AWG
|
2.814
4.19
|
3.555
5.29
|
0.041
0.06
|
28
12.70
|
5.6
14.22
|
15
15
|
| More Options |
12 AWG
12 AWG
|
1.774
2.64
|
2.241
3.33
|
0.037
0.06
|
44
19.96
|
6.6
16.76
|
20
20
|
| More Options |
12 AWG
12 AWG
|
1.774
2.64
|
2.241
3.33
|
0.037
0.06
|
44
19.96
|
7.1
18.03
|
20
20
|
| More Options |
10 AWG
10 AWG
|
1.111
1.65
|
1.404
2.09
|
0.035
0.05
|
70
31.75
|
7.2
18.29
|
25
25
|
| More Options |
8 AWG
8 AWG
|
0.715
1.06
|
0.903
1.34
|
0.035
0.05
|
112
50.80
|
8.7
22.10
|
35
35
|
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
Standards & References
- ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
- ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines
Construction
- Conductor: Soft drawn, annealed, flexible, rope-lay stranded, uncoated copper per ASTM B3/B172.
- Separator Tape: Non-conducting tape applied as needed between the conductor and insulation to facilitate stripping
- Insulation: Ethylene Propylene Rubber (EPR). Color coded: 3-Conductor: Black, White, Green; 4 Conductor: Black, White, Red, Green; 5-Conductor: Black, White, Red, Green, Orange; 6-Conductor: Black, White, Red, Green, Orange, Blue
- Filler: Fillers as needed
- Inner Jacket: Black, heavy-duty integral fill flame resistant, thermosetting Neoprene
- Reinforcement: Reinforcing twine applied between the two jacket layers.
- Outer Jacket: Black, heavy-duty, integral fill, flame resistant, thermosetting Neoprene. Alternate jacket colors available.
Resources
There are no downloadable resources for this product.