14-41 CU 4/C DRILL CORD 600V BLACK

Southwire #: 57141599

Flexible Copper conductors, Ethylene Propylene Diene Monimor (EPDM) insulation, Extra Heavy Duty Two Layer Heavy-Duty Neoprene Jacket with Optional Reflective Stripes

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

BLACK

Conductor Color

Packaging

Application & Features

Southwire’s Remote Power and Drill cord cable is a heavy-duty cable for use where limited flexing and rugged use are re- quired. For use in stationary heavy duty pumps or long-wall lighting application. Designed for long service life in wet or dry locations in underground mines. The cable is sunlight resistant, crush resistant, and abrasion resistant. Also suitable for continuous submersion in water. Embossed print legend for easy cable identification.

Specifications

Cond. Size	14 AWG 14 AWG
Conductor Number	4.0 4.0
Cond. Strands	41 41
Diameter Over Conductor (in) (cm)	0.073 0.19	inch cm
Inner Layer Thickness (mils) (mm)	45 1.14	mils mm
Diameter Over Insulation (in) (cm)	0.167 0.42	inch cm
Inner Jacket Thickness (mils) (mm)	65 1.65	mils mm
Outer Layer Thickness (mils) (mm)	85 2.16	mils mm
Approx. OD (in) (cm)	0.710 1.80	inch cm
Approx. Weight (lbs/1000') (kgs/km)	278 414	lbs/1000' kgs/km

Standards & References

ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines

Construction

Conductor: Soft drawn, annealed, flexible, rope-lay stranded, uncoated copper per ASTM B3/B172.
Separator Tape: Non-conducting tape applied as needed between the conductor and insulation to facilitate stripping
Insulation: Ethylene Propylene Rubber (EPR). Color coded: 3-Conductor: Black, White, Green; 4 Conductor: Black, White, Red, Green; 5-Conductor: Black, White, Red, Green, Orange; 6-Conductor: Black, White, Red, Green, Orange, Blue
Filler: Fillers as needed
Inner Jacket: Black, heavy-duty integral fill flame resistant, thermosetting Neoprene
Reinforcement: Reinforcing twine applied between the two jacket layers.
Outer Jacket: Black, heavy-duty, integral fill, flame resistant, thermosetting Neoprene. Alternate jacket colors available.

Resources

There are no downloadable resources for this product.