SPEC: 45411
12-19 CU PV XLP 2000V BLACK
Southwire #: 59795899
Application & Features
Southwire’s 2000 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions.
Specifications
| Cond. Size | 12 AWG 12 AWG | |
| Conductor Number | 0.0 0.0 | |
| Cond. Strands | 19 19 | |
| Diameter Over Conductor (in) (cm) | 0.088 0.22 | inch cm |
| Inner Layer Thickness (mils) (mm) | 75 1.91 | mils mm |
| Approx. OD (in) (cm) | 0.243 0.62 | inch cm |
| Copper Weight (lbs/1000') (kgs/km) | 20 30 | lbs/1000' kgs/km |
| Approx. Weight (lbs/1000') (kgs/km) | 39 58 | lbs/1000' kgs/km |
*VW-1 Rated
Standards & References
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- ASTM B787 19 Wire Combination Unilay-Stranded Copper Conductors
- UL 44 Thermoset-Insulated Wires and Cables
- UL 4703 Standard for Photovoltaic Wire
- Made in America: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
- VW-1 Vertical-Wire Flame Test (Optional)
Construction
- Conductor: Stranded bare copper per ASTM B3 and ASTM B8 or ASTM B787
- Insulation: Cross Linked Polyethylene (XLPE). Colors available upon request.
Resources
There are no downloadable resources for this product.